AboutPrivacy-policyTerms-conditionsFaqContact

    20-65 Charactor

    Created by Md jony islam

    Series Capacitor Calculator

    120-165 Charactor This tool calculates the overall capacitance value for multiple capacitors connected either in series.

    calculate series capacitor

    Capacitor Series Connection in Circuit

    View

    Download

    Series Capacitor CalculatorI3I230 µFCnI1Power Supply+-C2C1© Online Works Tools15 µFCt = 10 µF
    Fig-1: Series Capacitor Circuit
    Ω
    • millohms (mΩ)
    • ohms (Ω)
    • Kiloohms (KΩ)
    • Megaohms (MΩ)
    • Gigaohms (GΩ)
    V
    • nanoVolts (nV)
    • microVolts (µV)
    • milliVolts (mV)
    • Volts (V)
    • kilovolts (kV)
    • megavolts (MV)
    A
    • Picoampere (pA)
    • nanoamperes (nA)
    • microamperes (µA)
    • milliamperes (mA)
    • Amperes (A)
    • kiloamperes (kA)
    W
    • nanowatts (nW)
    • microwatts (µW)
    • milliwatts (mW)
    • Watts (W)
    • Kilowatts (KW)
    • megawatts (MW)
    • gigawatts (GW)

    Learn how we tools this below

    Add this tools to your site

    Buy me a for Source Code

    What is the (sub)?

    name
    Fig-1: name

    🙋 Try our op amp saturation voltage calculator . If you want to learn more about conversions using Electronic Engineering Project Calculators.

    (sub) - (sub) equations:

    Mathematical Definition:

    I = VR

    For Example,

    Mathematical Definition 2:

    I = VR

    For Example,

    Mathematical Definition 3:

    I = VR

    For Example,

    Mathematical Definition 4:

    I = VR

    For Example,

    Mathematical Definition:

    I = VR

    For Example,

    Mathematical Definition 2:

    I = VR

    For Example,

    Mathematical Definition 3:

    I = VR

    For Example,

    Mathematical Definition 4:

    I = VR

    For Example,

    Mathematical Definition:

    I = VR

    For Example,

    Mathematical Definition 2:

    I = VR

    For Example,

    Mathematical Definition 3:

    I = VR

    For Example,

    Mathematical Definition 4:

    I = VR

    For Example,

    Suggested Reading

    using the sub calculator.

    To use the above "sub Conversion Calculator" follow the below steps:

    1.

    2.

    name
    Fig-2: name

    3.

    4.

    5.

    6.

    7.

    8.

    sub conversion application

    Frequently Asked Questions - Resistor Wattage Conversion FAQs:

    How do you determine the wattage of a resistor?

    A resistor's wattage describes how much power it can safely handle before it overheats. It is decided according to the requirements of the application, not calculated. You find power by using P = V²/R or P = I²R, and you have to get a resistor with enough wattage to cover twice the power estimate to maintain safety and strength.

    What is the formula to calculate resistor power?

    Voltage across a resistor is P = V²/R, whereas current through the resistor is P = I²R (resistor power). Apply Ohm's Law to discover missing quantities, if that is necessary. Power should be expressed in watts (W), resistance in ohms (Ω), voltage in volts (V), and current in amps (A).

    How do I know if my resistor watt rating is enough?

    Examine the power dissipation you can anticipate from the resistor, which is calculated as P = I²R or P = V²/R. After, check how much power the resistor can accept by looking at its maximum wattage. If the actual wattage is similar to the model rating, use a model with more watts (like 1W instead of 0.25W) to stop overheating or the device from failing.

    How many watts can a 100 ohm resistor handle?

    The size and design of a 100-ohm resistor influence what watt rating it can have. The ratings for standard resistors are 1/8W, 1/4W, 1/2W, 1W, and 2W. Resistance in Ohms (100Ω) is not what determines the wattage; the manufacturer sets that. The information on the resistor’s datasheet or markings should always be looked at.

    Can I use any resistor wattage for a circuit?

    No. If a resistor is not rated high enough for the current, it may start to overheat or catch fire. Always use P = V²/R or I²R to arrive at the expected power, then pick a resistor with double its power value. Bigger and bulkier units are chosen for safer operation of circuits using high power.

    You may like these posts

    About the Author

    Md Jony Islam

    Md Jony Islam: Multidisciplinary Engineer & Financial Expert:

    Md. Jony Islam is a highly skilled professional with expertise in electronics, electrical, mechanical, and civil engineering, as well as finance. Specializing in transformer service and maintenance for 33/11kV substations, he ensures reliable and efficient electrical systems. His mechanical engineering skills drive innovative designs, while his financial acumen supports effective project budgeting. With a strong foundation in civil engineering, he contributes to robust infrastructure development. Md. Jony Islam's multidisciplinary approach ensures efficiency, quality, and reliability across all projects.