AboutPrivacy-policyTerms-conditionsFaqContact

    How to Convert Township To Square Pole | Township To Square Pole Conversion Tool

    Created by Md jony islam

    Township To Square Pole Calculator

    Land area measurements in townships are converted into those using square pole units by switching between units that were used in various places and times.In the US Public Land Survey System, a township is a large piece of land, usually marked by square boundaries, used for dividing and mapping smaller portions. In comparison, a square pole or square rod, which is smaller than an acre, has been used traditionally in older measurements and land surveying found in Britain and its colonies. The overall township area is multiplied by a certain number to figure out its area in square pole. Making this conversion is useful when looking at old deeds, fine-tuning land studies, making sure property measurements are the same before converting, and making comparisons from the past to the present.

    Township To Square Pole Converter Tool

    Result:

    Learn how we tools this below

    Add this tools to your site

    Buy me a for Source Code

    Township: A Comprehensive Explanation

    Definition of Township

    A township is a unit of area measurement that prevails mainly in the United States and is part of the PLSS. It refers to a square-shaped land unit that occupies an area of 36 square miles, being 6 by 6 miles.

    Conversion to Other Units

    Historical of Township

    The idea of the township was developed from the provision in the Land Ordinance of 1785, which intended to order land surveys for the orderly apportioning of land and selling of the public lands in the United States of America. The PLSS established townships and sections of land as a method to arrange the expansion of the western region.

    Modern Usage

    Townships are still used in land surveying and legal descriptions of property in the United States. Their applications include:

    Notable Uses of the Acre in Agriculture and Real Estate

    Suggested Reading

    Square Pole: A Comprehensive Explanation

    Definition of Square Pole

    The square pole, whose other names include perch, rod, or square perch, is the oldest form of the measure of land area. It is equal to the square of a figure with the sides one pole in length, or one rod.

    Conversion to Other Units

    Historical of Square Pole

    This kind of square pole has its background in middle-aged England, and it was often used in defining small plots of land. The pole, however, measures in a linear way, and it is equal to 16.5 feet or 5.5 yards. By its use, the square pole was often employed together with other conventional types of land measurement, including the acre, rood, and square chain.
    One acre is equal to 160 square poles, and one rood is equivalent to forty square poles. This relationship made the square pole a handy unit to use when subdividing and possibly describing yet smaller portions of land.

    Modern Usage

    Today the square pole is not a used unit, and it is most valuable in historical research and legal cases of land ownership or property division. It has in fact very little use in the current or real estate surveys and is replaced by metric units such as the square meter or hectare or imperial units like the acre.

    Notable Uses in Agriculture and Real Estate

    🙋 Check our Convert Square Mil To Square Mile Us Survey and discover




    Township to Square pole Conversion Table:

    TownshipSquare pole

    How to Convert Township to Square pole:

    1 Township = 3686400.0000000894 Square pole
    1 Square pole = 2.71267e-7 Township

    For Example: Convert 15 Township to Square pole:
    15 Township = 15 × 3686400.0000000894 Square pole = 55296000.0000013411 Square pole

    Frequently Asked Questions - Area Converter Conversion FAQs:

    What’s 1 arpent in acres?

    One arpent equals approximately 0.85 acres.

    What’s the perimeter of a square mile?

    For a square mile (27,878,400 ft²), perimeter is about 21,120 feet (4 miles).

    How do I convert 1,000 square inches to square centimeters?

    Multiply 1,000 square inches by 6.4516; 1,000 in² ≈ 6,451.6 cm².

    What’s 100 barns in square meters?

    Multiply 100 barns by 10⁻²⁸; 100 barns = 10⁻²⁶ square meters.

    What is 100 square feet in square inches?

    100 × 144 = 14,400 square inches

    What’s 1,000,000 barns in square meters?

    Multiply 1,000,000 barns by 10⁻²⁸; 1,000,000 barns = 10⁻²² square meters.

    What’s 2 square rods in square feet?

    Multiply 2 square rods by 272.25; 2 square rods = 544.5 square feet.

    How do I convert 2,880 square feet to square inches?

    Multiply 2,880 square feet by 144; 2,880 ft² = 414,720 in².

    What’s a hectare in square meters?

    One hectare equals 10,000 square meters.

    How do I convert 10 square miles to square kilometers?

    Multiply 10 square miles by 2.58999; 10 mi² ≈ 25.8999 km².

    You may like these posts

    About the Author

    Md Jony Islam

    Md Jony Islam: Multidisciplinary Engineer & Financial Expert:

    Md. Jony Islam is a highly skilled professional with expertise in electronics, electrical, mechanical, and civil engineering, as well as finance. Specializing in transformer service and maintenance for 33/11kV substations, he ensures reliable and efficient electrical systems. His mechanical engineering skills drive innovative designs, while his financial acumen supports effective project budgeting. With a strong foundation in civil engineering, he contributes to robust infrastructure development. Md. Jony Islam's multidisciplinary approach ensures efficiency, quality, and reliability across all projects.