AboutPrivacy-policyTerms-conditionsFaqContact

    mA to Voltage Calculator: Convert Milliamps to Voltage Easily

    Created by Md jony islam

    electrical current voltage conversion

    Determine the voltage (in Volt) of current (milliamps) via resistance (or) the value of load with this simple mA to Voltage Calculator. Ideal on the electronics and electrical work. When dealing with electrical and electronic circuits, it is vital to convert milliamps (mA) to voltage (V) in order to appreciate current drop reading through a resistor or any other load. On the mA to Voltage Calculator, a user enters current and resistance values to obtain accurate voltage information according to the formulation of Ohm to get the actual Voltage.

    voltage calculation from current

    mA to Voltage Calculator

    Learn how we tools this below

    Add this tools to your site

    Buy me a for Source Code

    What do you need to know to calculate mA to Voltage?

    The mA to Voltage Calculator is used to calculate voltage (V) based on the electric current in milliamps (mA) based on Ohm's Law. This tool calculates the voltage applied across the load; this can be done by inserting the current value in mA and the resistance or the load in ohms. This calculator is handy in cases of electrical engineering, technicians, and hobbyists in the field of handling circuits, allowing a fast calculation of the voltage based on current measurements in order to troubleshoot or design circuits.

    🙋 Try our Fusing Current Calculator . If you want to learn more about conversions using Electrical Engineering Project Calculators.

    current voltage calculator mA

    The value can be indicated in volts, which can be used by the users to confirm electrical parameters or circuit behavior with ease.

    Suggested Reading

    Frequently Asked Questions - ma to voltage Conversion FAQs:

    How do you convert mA to volts?

    The conversion of milliamps to volts requires Ohm's Law through calculation, V = I × R, and includes resistance measurement in ohms while also converting current from amperes to milliamps using 1 mA = 0.001 A. Direct conversion is not possible when there is no resistance in place. The circuit, consisting of 20 mA flowing through a 250-ohm resistor, generates 5 V.

    How many milliamps is equal to 1 volt?

    It depends on the resistance. Using Ohm’s Law, I = V ÷ R. The resistor resistance of 250 ohms allows 1 V to produce 4 milliamperes. Direct conversion of volts to mA requires knowledge of the resistance value in the measurement process. Your calculations must include the mentioned resistance of the sensor or load.

    How to convert a 4-20 mA signal to voltage?

    An input resistor of 250 ohms should be used to change 4–20 mA current signals into voltage outputs. Apply Ohm's Law relationship V = I × R. The output voltage falls between 1 V and 5 V, so it fits with various analog input systems, including PLCs and ADCs.

    What is the formula to convert mA to volts in a circuit?

    The key formula is V = I × R. The current measurement uses amperes, while resistance takes the value in ohms. Normalize mA values by dividing them by 1000. The designated equation functions for both resistive components and sensors, as well as control circuit signal processors.

    Why convert mA to voltage in instrumentation?

    The 4–20 mA current signaling system provides resistance to noise contamination and voltage loss, making it suitable for extended cable connections. The majority of controllers, together with ADCs, require voltage readings. The conversion of mA signals into voltage through signal processing enables PLCs and SCADA, together with monitoring systems, to perform precise data acquisition.

    You may like these posts

    About the Author

    Md Jony Islam

    Md Jony Islam: Multidisciplinary Engineer & Financial Expert:

    Md. Jony Islam is a highly skilled professional with expertise in electronics, electrical, mechanical, and civil engineering, as well as finance. Specializing in transformer service and maintenance for 33/11kV substations, he ensures reliable and efficient electrical systems. His mechanical engineering skills drive innovative designs, while his financial acumen supports effective project budgeting. With a strong foundation in civil engineering, he contributes to robust infrastructure development. Md. Jony Islam's multidisciplinary approach ensures efficiency, quality, and reliability across all projects.