AboutPrivacy-policyTerms-conditionsFaqContact

    How to Convert Square Foot Us Survey To Section | Square Foot Us Survey To Section Conversion Tool

    Created by Md jony islam

    Square Foot Us Survey To Section Calculator

    A conversion of square foot (US Survey) to section involves changing areas measured by US Survey square feet into sections.Properties in the United States utilize the US Survey system for their land measurement requirements and boundary assessments. In the Public Land Survey System, the section functions as a square mile measuring unit which equals 640 acres. The substantial measurements of vast acreage commonly utilize sections because one square mile represents a large measurement unit which is most suitable for rural and agricultural land descriptions. Building footprints alongside residential lots require square feet because their size is too small for sections. The conversion process enables the connection between specific detailed measurements and standard survey-based land division systems.

    Square Foot Us Survey To Section Converter Tool

    Result:

    Learn how we tools this below

    Add this tools to your site

    Buy me a for Source Code

    Comprehensive Explanation of the Square Foot (US Survey) as a Unit of Measurement

    Definition of Square Foot (US Survey)

    The square foot (US survey) is an area unit tied to the US survey foot, which at one point was defined as being equal to 0.1200 000 000 319 131 meters. A square foot is the area of a square that has its sides measuring one US survey foot.

    Historical of Square Foot (US Survey)

    The US Survey Foot is a measure of exactly 1/6336000 of a geographic quarter of the earth, used as a standard when surveying land in early America. This is a little dissimilar from the international foot, which is equal to 0.3048 meters. The difference is really small, but it makes a lot of difference when dealing with voluminous surveys, as in the case of the survey foot in the United States and the international survey foot.
    The chief use of the US survey system was for establishing the area's geographic maps as well as boundaries between tracts of land in the United States. The new standard for measurement was anchored to the International Foot in 1959 for many uses. However, the US survey foot was still used for all surveying in the United States and geodetic surveys until the US' National Geodetic Survey (NGS) started a transition to the international foot in the year 2022.

    Conversion to Other Units

    Use in Land Measurement Today

    Notable Uses in Agriculture and Real Estate

    Comparison with the Acre

    Suggested Reading

    Comprehensive Explanation of the Section as a Unit of Measurement

    Definition of Section

    A section is a part of the United States PLSS that measures the extent of land as a division and sub-division. One section is a square area with an area of 1 mile at each side, or 640 acres or 2.58999 square kilometers. The use of sections is very helpful in the division as well as the description of land especially in country and agricultural property.

    Historical of Section

    Originally, the section developed originated from the Land Ordinance of 1785 that provided for the creation of the public land survey system (PLSS) with the purpose of providing for surveys of the land in the United States, especially in the western areas. The system distributed land into townships and sections and fractions of such sections. A township is a six-by-six-mile square that is made up of 36 sections.
    Further, the constantly changing geographical boundaries meant that a standardized system of conveying and dealing in land was possible only if it was clearly defined.

    Conversion to Other Units

    Use in Land Measurement Today

    Notable Uses in Agriculture and Real Estate

    🙋 Check our Convert Acre Us Survey To Cuerda and discover




    Square foot (US survey) to Section Conversion Table:

    Square foot (US survey)Section

    How to Convert Square Square foot (US survey) to Section:

    1 Square foot (US survey) = 3.58702e-8 Section
    1 Section = 27878288.486510925 Square foot (US survey)

    For Example: Convert 15 Square foot (US survey) to Section:
    15 Square foot (US survey) = 15 × 3.58702e-8 Section = 5.38053e-7 Section

    Frequently Asked Questions - Area Converter Conversion FAQs:

    How do I convert 500 square feet to square yards?

    Divide 500 square feet by 9; 500 ft² ≈ 55.5556 yd².

    What’s the difference between square feet and square inches?

    Square feet is a larger area unit; square inches are smaller.

    What’s 2 townships in acres?

    Multiply 2 townships by 23,040; 2 townships = 46,080 acres.

    What’s a square dekameter in square meters?

    One square dekameter equals 100 square meters.

    What’s 7 arpents in square feet?

    Multiply 7 arpents by ~37,026; 7 arpents ≈ 259,182 square feet.

    Where is square inch commonly used?

    In design, printing, electronics, and detailed measurements.

    How do I convert square feet to square yards?

    Divide square feet by 9; 9 ft² = 1 yd².

    What’s 4 homesteads in acres?

    Multiply 4 homesteads by 160; 4 homesteads = 640 acres.

    What’s the perimeter of a barn?

    A barn (10⁻²⁸ m²) as a square has a perimeter of ~4 × 10⁻¹⁴ meters, used in physics.

    How do I convert 10 hectares to square feet?

    Multiply 10 hectares by 107,639; 10 hectares ≈ 1,076,390 ft².

    You may like these posts

    About the Author

    Md Jony Islam

    Md Jony Islam: Multidisciplinary Engineer & Financial Expert:

    Md. Jony Islam is a highly skilled professional with expertise in electronics, electrical, mechanical, and civil engineering, as well as finance. Specializing in transformer service and maintenance for 33/11kV substations, he ensures reliable and efficient electrical systems. His mechanical engineering skills drive innovative designs, while his financial acumen supports effective project budgeting. With a strong foundation in civil engineering, he contributes to robust infrastructure development. Md. Jony Islam's multidisciplinary approach ensures efficiency, quality, and reliability across all projects.