AboutPrivacy-policyTerms-conditionsFaqContact

    Reactive Power Calculator for AC Circuits in Volt-Amps Reactive

    Created by Md jony islam

    inductive reactive power calculator

    Determine reactive power (Q) in AC circuits based on the voltage, current, and power factor. Computing VARs of inductive or capacitive loads is easy. Reactive power (Q) represents the portion of electricity that oscillates between the source and reactive components like inductors and capacitors, measured in volt-amps reactive (VAR). It is calculated using the formula: Q = V × I × sin(𝜙), where V is voltage, I is current, and 𝜙 is the phase angle between voltage and current. This calculator aids in quantifying reactive power to improve power factor and system efficiency.

    capacitive reactive power calculation

    Reactive Power Calculator

    Learn how we tools this below

    Add this tools to your site

    Buy me a for Source Code

    What do you need to know to calculate Reactive Power?

    The Reactive Power Calculator calculates reactive power (Q) of AC circuits using volt-amps reactive (VAR) as its unit. The reactive power is generated because inductive/capacitive loads store energy in the magnetic/electric fields, and this energy does not do any useful work even though they change the voltage and current within the system. The calculator assists engineers, electricians, and students in calculating reactive power based on voltage, current, and power factor or phase angle.

    🙋 Try our Line Reactor Calculator . If you want to learn more about conversions using Electrical Engineering Project Calculators.

    electrical reactive power tool

    The users will be able to optimize electrical systems and reduce energy losses by exploiting the knowledge of reactive power to improve power factor correction. Transient values in volts (V), amperes (A), and power factor can be entered quickly to compute the reactive power in VARs, useful in load balancing and electrical system design.

    Suggested Reading

    Frequently Asked Questions - reactive power Conversion FAQs:

    How do you calculate reactive power (kVAR)?

    Real power (kW) and the arithmetic tangent of the power factor (PF) determine reactive power (kVAR) according to the formula. kVAR = kW × tan(acos(PF)). The calculation for kW utilizes real power and PF as the power factor. The AC system requires non-working power called reactive power to sustain voltage levels and support the magnetic fields used in motors, along with transformers. The component plays a crucial role in maintaining system stability, even though it does not operate on actual work.

    How do you calculate kVAR from kW and power factor?

    The calculation of kVAR requires the triangle rule when using available kW and PF values. kVAR = kW × √[(1/PF²) – 1]. The power triangle provides the mathematical basis for this calculation because it demonstrates that kVA and kVAR, and kW exist in a right triangle formation. However, when provided with two known values, you can compute the third value.

    What does a 0.95 power factor mean?

    The power factor of 0.95 represents a situation where electrical power expenditure divides into 95% useful output power (kW) and 5% reactive power (kVAR). The efficiency is high because most electrical power is transformed into useful work while wasting minimal energy. The type of equipment determines if PF will be lagging with inductive loads or leading with capacitive loads.

    Why is reactive power important in electrical systems?

    The regulation of voltage, along with energy flow in inductive and capacitive equipment, depends on Reactive power (kVAR). The capability of motors, along with transformers and AC devices, depends on reactive power to operate efficiently. The stable power grid operation and reduced transmission losses, along with enhanced supply reliability, are byproducts of reactive power support.

    What is the relationship between kW, kVA, and kVAR?

    An AC power system connects all three power types through the power triangle, which shows kVA² equates to the sum of kW² plus kVAR². kVA² = kW² + kVAR². kVA represents total power supply, while kW stands for real working power, and kVAR stands for reactive energy. Power factor = kW ÷ kVA. This relationship serves as a foundation for determining the necessary sizes of generators and transformers and correcting power factor.

    You may like these posts

    About the Author

    Md Jony Islam

    Md Jony Islam: Multidisciplinary Engineer & Financial Expert:

    Md. Jony Islam is a highly skilled professional with expertise in electronics, electrical, mechanical, and civil engineering, as well as finance. Specializing in transformer service and maintenance for 33/11kV substations, he ensures reliable and efficient electrical systems. His mechanical engineering skills drive innovative designs, while his financial acumen supports effective project budgeting. With a strong foundation in civil engineering, he contributes to robust infrastructure development. Md. Jony Islam's multidisciplinary approach ensures efficiency, quality, and reliability across all projects.