AboutPrivacy-policyTerms-conditionsFaqContact

    Wheel Horsepower Calculator: Calculate Wheel HP from Torque & RPM

    Created by Md jony islam

    wheel horsepower formula calculator

    Wheel horsepower can be calculated with a simple user input of torque and RPM. This calculator is used to estimate the power output of a car or other machine at its wheels. Wheel horsepower is computed by the product of the torque at the wheels and rotational speed (RPM) and the use of a constant factor to change the unit of horsepower. The calculation gives an understanding of the available power at the wheels that takes into consideration the effects and losses of the drivetrain.

    wheel torque to horsepower

    Wheel Horsepower Calculator

    Learn how we tools this below

    Add this tools to your site

    Buy me a for Source Code

    What do you need to know to calculate Wheel Horsepower?

    The Wheel Horsepower Calculator determines the wheel power of a vehicle or equipment, taking into consideration the torque and revolution rate (RPM). In contrast with engine horsepower, wheel horsepower eliminates drivetrain losses and is a better indicator of realizable power at the wheels. This calculator gives an equivalent figure of RPM and torque (mostly lb-ft or Nm) in horsepower that people can use to interpret actual performance.

    🙋 Try our Voltage To Energy Calculator . If you want to learn more about conversions using Electrical Engineering Project Calculators.

    torque to wheel horsepower calculator

    It can be helpful when assessing the power delivery and tuning a vehicle among the automotive enthusiasts, mechanics, and engineers.

    Suggested Reading

    Frequently Asked Questions - wheel horsepower Conversion FAQs:

    How do you calculate WHP?

    WHP stands for Wheel Horsepower, which is derived from testing the power output at the wheels using a dynamometer. Drive train efficiency reductions bring WHP levels below the engine's capability. The basic formula is: To compute WHP, subtract the drivetrain loss percent value from BHP and multiply it by BHP. A vehicle with 400 BHP and 15% drivetrain loss will have 340 HP WHP.

    What is the difference between WHP and HP?

    The power delivered to vehicle wheels uses the term WHP, while measurements conducted at the engine crankshaft use the terms HP or BHP. WHP maintains a naturally lower position because drivetrain losses occur. The degree of power loss differs among vehicles, where RWD loses ~15% power and FWD loses ~10%, and AWD suffers approximately 20% loss.

    Can WHP be measured directly?

    The measurement of WHP occurs directly through the use of a chassis dynamometer (dyno). Under roller conditions, the dyno system generates power measurements at the wheels while the vehicle maintains load. WHP values obtained through this method provide real-time measurement of accurate results.

    How does drivetrain type affect WHP?

    The choice of drivetrain system determines the degree of power loss before wheel delivery. On average: FWD loses approximately 10% of power, while RWD delivers up to 15% loss, and AWD can reach 20% power loss. An engine produces different WHP readings according to the setups installed.

    11. Does tire size affect WHP?

    Even though the use of bigger or heavier wheels leads to reduced WHP readings on dynos. A car's larger tires introduce extra rotational weight that generates more driving resistance to the drivetrain system. Dynamometer measurements from wheels of different sizes than stock might reveal slightly decreased WHP outputs.

    You may like these posts

    About the Author

    Md Jony Islam

    Md Jony Islam: Multidisciplinary Engineer & Financial Expert:

    Md. Jony Islam is a highly skilled professional with expertise in electronics, electrical, mechanical, and civil engineering, as well as finance. Specializing in transformer service and maintenance for 33/11kV substations, he ensures reliable and efficient electrical systems. His mechanical engineering skills drive innovative designs, while his financial acumen supports effective project budgeting. With a strong foundation in civil engineering, he contributes to robust infrastructure development. Md. Jony Islam's multidisciplinary approach ensures efficiency, quality, and reliability across all projects.